Dreame Aqua10 Track care set

The Dreame Aqua10 Track is the base model in the Track lineup, pairing 25,000 Pa of Vormax suction with the TrackSync looped track mop. Unlike flat-pad robots that soak and then swab with a static cloth, the Aqua10 Track runs a continuous loop that is fed with fresh 45 °C warm water from the robot during cleaning. The Multifunctional PowerDock finishes each session with a 100 °C ThermoHub wash and hot-air drying, while auto-empty clears the onboard dustbin into a sealed bag. The HyperStream Detangling DuoBrush uses two counter-rotating rollers and a central divider channel that prevents hair from wrapping into a single tangle, and ProLeap legs clear thresholds up to 60 mm.

The track mop platform introduces maintenance surfaces that flat-pad robots do not have. An internal scrape bar separates dirty water from the returning loop section, and a water-return channel routes soiled water into the onboard tank. Residue on either surface changes the water-delivery pattern, producing streaked wet tracks on hard floors that owners often diagnose as a worn track cloth when the root cause is inside the robot. Monthly cleaning of the scrape bar and a dock-clean cycle to flush the return channel prevents this. The HEPA filter should be replaced every two to three months at the 25,000 Pa tier, and the side brush post pivot benefits from a monthly wipe to keep the brush reaching its full outward sweep along walls.

This care set from Plus.Parts® puts every consumable the Aqua10 Track needs on hand in a single delivery, so the maintenance schedule stays on track rather than drifting when a single component runs out. If you would like to verify the fit before ordering, the VacuumReviews.eu team are happy to check personally.

At a glance

• Built to Last – Denser filter media, heat-resistant mop roller fibres and a flexible brush compound are selected to hold performance across the full replacement cycle rather than tailing off mid-interval.
• Straightforward Installation – Every brush, filter, roller and bag drops into the Aqua10 Track exactly the way the factory part does, with no trimming, tools or adjustment required.
• Reliable Quality – Components are checked before shipping so the set arrives complete and ready to fit, backed by a team that stands behind every order.