Dreame RLR81CE-1 – Plus.Parts® Replenishment Kit

The Dreame RLR81CE-1 is an alternative market designation for a robot built on the Aqua10 Track consumable platform. Regardless of the label, the hardware inside follows the same Track blueprint: Vormax suction, a HyperStream Detangling DuoBrush with dual counter-rotating rollers and a central divider channel that sheds hair before it can wrap, a TrackSync looped track mop continuously wetted with 45 °C warm water during cleaning, and a Multifunctional PowerDock with 100 °C ThermoHub washing, hot-air drying and auto-empty. ProLeap retractable legs clear thresholds up to 60 mm. Because the consumable platform is identical to the wider Track family, the service intervals carry over directly.

The consumable schedule is the same as every other Track-series variant. The HEPA filter should be replaced every two to three months; tap out loose dust between changes but never wash the filter medium with water, as this degrades the HEPA layer even when it looks intact. The track mop lasts two to three months under daily use before its fibres lose the absorbency needed for even wet coverage. The DuoBrush divider channel accumulates compressed fibre over time and must be cleared at each weekly brush clean; once the channel packs, hair wraps onto both rollers simultaneously, which is harder to clear than standard single-roll wrap. ProLeap leg pivots collect hair and grit over time, a monthly wipe of both joints keeps the chassis reaching full lift on thresholds it previously cleared.

Quality and availability should not depend on which designation your unit carries. This replenishment kit from Plus.Parts® provides direct-fit alternatives to the original Dreame RAK66 consumables. The VacuumReviews.eu team know the Track family thoroughly and will confirm the fit for any RLR81CE-1 variant personally if you reach out before ordering.

At a glance

• Direct-Fit Compatibility – Every part drops into the Dreame RLR81CE-1 the same way it fits any Aqua10 Track series robot, with no tools, trimming or guesswork needed to complete the swap.
• Long-Lasting Components – Tighter filter weaves, heat-resilient roller fibres and a flexible brush compound ensure each part holds its performance across the recommended replacement window.
• Responsive Support – A dedicated team at VacuumReviews.eu stands behind every order, ready to help with compatibility questions, delivery details or anything else you need.