Ecovacs Deebot T30S – Plus.Parts® Maintenance Set

The Ecovacs Deebot T30S is the foundation of the T30S line: 11,000 Pa suction, OZMO TURBO dual spinning mop pads turning at 180 RPM, LiDAR navigation and the TruEdge extending mop plate, all served by the 70°C hot-water Omni Station that rinses and warm-air dries the pads after every run. Because it runs the original OZMO TURBO firmware rather than the Pro and AI’s 2.0 version, it skips the extra wash-and-return cycles those models trigger, so it is the gentlest of the three on its mop pads – budget a change roughly every ten to twelve weeks. The other consumables track the family schedule: the multi-layer HEPA filter loads about every two months at the robot’s high working suction, the ZeroTangle V-shaped main brush runs close to a six-month life, and the single side brush bends out of true against skirting over a couple of months.

This maintenance set keeps each of those intervals stocked with Plus.Parts® components built as a direct-fit alternative to the original Ecovacs part: two anti-tangle main brushes, four side brushes, four spinning mop pads, six antibacterial HEPA filters and four antibacterial dust bags, all sized to the T30S’s own mounts so fitting them is no different from swapping the originals. The filters are where quality shows, because the ZeroTangle roller passes most hair to the bin and leaves the HEPA element as the main fine-filtration point; a tighter media holds suction steady across the full two-month interval, while a loose generic filter lets dust drift back into the room and makes the motor work harder than it should.

The mop pads keep their scrubbing fibre through repeated hot dock rinses rather than matting grey early, and the main brush uses a rubber compound that stays supple for months instead of hardening.

At a glance

• Direct-Fit Compatibility – Every part is matched to the Deebot T30S’s own brush mounts, mop plates and filter bay, so installation is tool-free and works exactly like swapping the original DKT080170 components.
• Built to Last – Denser filter media, hard-wearing spinning mop pads and a supple main-brush compound that hold their performance across the full replacement cycle instead of fading early.
• Recommended by Our Team – This is the set our review team points T30S owners toward, drawn from hands-on experience with how the platform actually wears.