.png)
The Ecovacs T20 Omni Station (CH2232) is the dock paired with every T20 robot variant, and it carries maintenance obligations as consequential for cleaning quality as the robot consumables themselves. The station houses the heating element for the 55°C pad wash, the hot-air drying fan, the clean- and dirty-water tanks, the auto-empty dustbag compartment and the spray nozzles – treat it as a background box and pad-wash quality, drying and auto-empty all decline together.
This set provides the Plus.Parts® consumables that complete that coupled service chain, fitted as a direct alternative to the original Ecovacs part DKT010095. The four 2.5-litre dustbags are the station’s own wear item: as the auto-empty transfers debris from the robot at each dock, a full or poorly seated bag is a common cause of a failed empty cycle or a robot rejected on return. The two OZMO Turbo pads are what the 55°C cycle washes after every mop run, but 180 RPM spinning contact breaks the fibre down before it looks worn, so inspect at two months and replace on feel rather than appearance.
On the robot side the four pleated HEPA filters load fast behind the 6,000 Pa fan – tap clean weekly, swap on the white-to-grey shift and keep them dry – while the floating rubber main brush collects hair at its two end caps and the four dual-corner side brushes are renewed as a matched pair. Together they keep the CH2232 station and its robot working as one system. The VacuumReviews.eu team will confirm the set against your T20 setup before it ships.
At a glance
- Matched to Your Device – Robot consumables plus the 2.5-litre dock dustbags matched to the T20 Omni Station (CH2232) and the robot it docks.
- Built to Last – Durable pleated filters, resilient OZMO Turbo pads and four-layer dustbags chosen to keep wash, drying and auto-empty performing across the cycle.
- Recommended by Our Team – VacuumReviews.eu reviews the Deebot T20 system and reminds owners that station upkeep matters as much as the robot’s.
Reviews
There are no reviews yet.