Ecovacs T30 Omni Station (CH2311) – Plus.Parts® Replenishment Kit

64,95

Ecovacs T30 Omni Station CH2311 spare parts

The Ecovacs T30 Omni Station (CH2311) is the full-height OMNI dock that ships with the Deebot T30 Omni, handling 70 °C mop washing, warm-air drying and 3.5-litre auto-empty. This replenishment kit covers every consumable across the station and its paired robot: two anti-tangle main brushes, four side brushes, eight filters, four antibacterial dust bags and four mop pads.

Plus.Parts® quality, matched to your machine.

Want to learn more about your Ecovacs T30 Omni Station (CH2311)? Check out our review and maintenance guide.

In stock

Add to Cart
Ecovacs T30 Omni Station (CH2311) - Plus.Parts® Replenishment Kit
Ecovacs T30 Omni Station (CH2311) - Plus.Parts® Replenishment Kit
64,95
This item is selling fast!
  • Free shipping from €59
  • Post-payment available
  • Order yours before 3:00PM for same day dispatch (if in stock)
  • Delivery from our own stock
  • Returns possible within 14 days of receipt
Guaranteed Safe Checkout

Ecovacs T30 Omni Station (CH2311) - Plus.Parts® Replenishment Kit
Ecovacs T30 Omni Station (CH2311) – Plus.Parts® Replenishment Kit
64,95

    The Ecovacs T30 Omni Station (CH2311) is the primary dock designation that ships with the Deebot T30 Omni. It is a full-height OMNI station with a 70 °C hot-water mop wash cycle, a warm-air drying system and a 3.5-litre dustbag compartment for auto-empty. The wash plate inside the CH2311 collects a slurry of fine debris rinsed off the mop pads after every cleaning run, and that slurry bakes onto the surface during the warm-air drying phase. Over days and weeks the baked residue builds into a film that deflects wash water unevenly, causing one pad to return to the floor noticeably less clean than the other.

    The spray nozzles are the other maintenance priority. At 70 °C, calcium and magnesium in tap water precipitate onto the nozzle apertures faster than on a cold-water dock. A partially blocked nozzle is the single most common cause of uneven pad wash and resoiled streaks on hard floor across the T30 Omni series. In soft-water regions a monthly wipe is sufficient; in hard-water areas every two to three weeks, with a dilute citric acid descale every two to three months. The 3.5-litre dustbag is rated for 90 days but realistically reaches capacity at four to seven weeks under daily auto-empty, and a monthly wipe of the chute opening keeps the sensor reading bag fill level accurately rather than detecting dust on the contact surface.

    This kit contains Plus.Parts® components built as a direct-fit alternative to the original Ecovacs DKT080142 consumables: two anti-tangle main brushes, four side brushes, eight filters, four antibacterial dust bags and four mop pads. Parts are interchangeable across all dock designations in the T30 Omni series. The VacuumReviews.eu team reviews this platform and is happy to help with any question about the CH2311 or its maintenance schedule.

    At a glance

    • Full Station Coverage – Dustbags, mop pads, filters and brushes that cover both the CH2311 dock and its paired T30 Omni robot in a single order.
    • Designed for Hot-Water Docks – Antibacterial dust bags and mop pads made to perform under the 70 °C wash and warm-air dry cycle the CH2311 runs after every session.
    • Recommended by Our Team – VacuumReviews.eu reviews the T30 Omni Station and recommends this kit as the complete way to keep the CH2311 and its robot on schedule.

    Additional information

    Weight 200 g
    Dimensions 400 × 200 × 300 mm
    Manufacturer

    Plus.Parts

    Manufacturer Part Number(s)

    DKT080142

    Package Quantity

    22

    Suitable Device Brand

    Ecovacs

    Suitable Device Model

    T30 Omni Station (CH2311)

    Reviews

    There are no reviews yet.

    Be the first to review “Ecovacs T30 Omni Station (CH2311) – Plus.Parts® Replenishment Kit”

    Your email address will not be published. Required fields are marked *