Eufy Omni E28 – Plus.Parts® Maintenance Set

The Eufy Omni E28 sits at the top of the Omni range alongside the E25, running 20,000 Pa turbo suction with the same 290 mm HydroJet rolling mop at 180 RPM under roughly 1 kg of pressure, twin scrapers that peel soiled water away during the cleaning pass, and a dual-scraper dock with 35 to 50°C hot-air drying, a 2.5 L clean-water tank and a 1.8 L dirty-water tank. Because it shares that hardware, every consumable and interval carries straight over. The HEPA filter handles roughly two and a half times the airflow of a 7,000 Pa robot, so it is tapped clean every one to two weeks and replaced every two months; the rolling mop, abraded by the scrapers on every pass, is inspected at six weeks and replaced every three to four months; the DuoSpiral main brushes are cleared every one to two weeks and replaced every five to seven months; and the side brushes are checked weekly and replaced every three to six months.

This maintenance set covers each of those intervals with Plus.Parts® components built as a direct-fit alternative to the original Eufy part: one DuoSpiral anti-tangle main brush set, four side brushes – two left and two right – three dust-bin filters, three dust bags and two rolling mops, thirteen parts sized to the Omni E28’s roller bay, mop seat, filter chamber and dock. The filter does the heavy lifting on air quality, so a properly built HEPA element keeps the 20,000 Pa suction steady across its interval, while a loose generic filter lets fine dust drift back into the room and makes the brushless motor work harder than it needs to.

The DuoSpiral anti-tangle pair channels hair into the robot and clears it at the dock by retracting and rotating bidirectionally, so both rollers and the retraction pivot get a check at every service; a pivot that no longer swings freely is the usual cause of repeated rolling-brush errors on otherwise clean hardware. The side brushes arrive in matched left and right pairs so they reach corners the way the originals do.

At a glance

• Matched to Your Device – DuoSpiral main brushes, rolling mops, left/right side brushes, HEPA filters and dust bags are all sized to the Omni E28’s roller bay, mop seat and filter chamber, so each part fits without guesswork.
• Long-Lasting Components – A properly built HEPA filter for 20,000 Pa airflow, hard-wearing rolling mops and durable brushes that hold up across the robot’s full service schedule.