Eufy T291X – Plus.Parts® Replacement Dust Bags

The Eufy T291X handles the bin management side of a compatible Eufy robot vacuum routine automatically, drawing collected debris from the vacuum at the end of each session and pressing it into a sealed bag under dock pressure. The system runs independently once set up, with the indicator providing the only prompt needed, typically after several days of regular daily cleaning. Between those intervals, the vacuum’s bin stays empty and the collected dust remains sealed inside the station bag.

These 6 replacement dust bags are the consumable that keeps the T291X station running through those intervals. Each bag is formed to the station’s sealing recess dimensions, engaging the auto-seal mechanism so every particle collected during the emptying cycle goes directly into the bag with no leakage around the connection. The bags are rated for the same fill volume the T291X was built to accept, so the indicator prompts at the correct moment and suction stays consistent through each fill cycle. Plus.Parts® supplies these bags to the original specification, keeping the station’s fill counter and reminder timing accurate after each swap.

Each bag in the 6-pack is produced to a consistent seam and material standard, delivering reliable containment performance across the full set. The closure seals on removal so disposal is clean and no collected dust escapes during the bag change.

The basics

• Tested and Reviewed – Verified against T291X station tolerances before listing to confirm the auto-seal seats correctly and the fill indicator triggers on schedule.
• Consistent Performance – Rated capacity matches the T291X dock’s design so suction output and indicator timing remain on track across all 6 bags in the pack.
• Recommended by Our Team – Our team checked these bags in the T291X station before listing – reach out if you have questions about compatibility or timing.