Eufy X10 Pro Omni – Plus.Parts® Maintenance Set

The Eufy X10 Pro Omni is the named flagship of this spinning-pad Omni family, running 8,000 Pa suction with two pentagonal mop pads that rotate at 180 RPM under 1 kg of downward pressure, a single anti-tangle roller, and a UniClean dock that auto-empties the bin, washes and refills the pads and dries them with about 45°C hot air. The T2351G11 and T2351T11 are its model-code twins; all share one consumable set. At 8,000 Pa the HEPA filter darkens faster than on a lower-suction robot, so its colour is a more honest guide to replacement than the calendar.

This set keeps each interval supplied with Plus.Parts® consumables built as a direct-fit alternative to the original Eufy part: two main brushes, four side brushes, four washable filters, four mop pads and two antibacterial dust bags, sixteen parts in all. The single roller uses two orange end caps that snap into place, and hair reaches the bearing sockets behind them even when the roller looks clean, so both caps are pulled at the one-to-two-week clean; replace the roller every five to seven months. The washable filters are tapped on all four sides every one to two weeks and replaced every two to three months as the medium loads at 8,000 Pa.

The pentagonal pads concentrate wear on their outer edges, which travel the longest path under spin, so they are inspected at eight weeks and replaced every three to six months – a stiff, smooth or stubbornly discoloured pad is finished regardless of date. The side brush is cleared of thread weekly and replaced every three to six months; the dock dustbag is swapped every four to eight weeks; and the dirty-water tank is emptied and rinsed every two to three days, the platform’s single most important habit because residue water sours within days and can be carried back to a freshly washed pad. Wipe the spray nozzles monthly and lift wash-tray film with dilute citric acid.

At a glance

• Matched to Your Device – The roller, washable filters, pentagonal spinning pads, side brushes and dock dustbags all fit the X10 Pro Omni brush bay, filter chamber and UniClean mop deck, so each part seats without guesswork.
• Long-Lasting Components – A filter built for sustained 8,000 Pa airflow and hard-wearing pentagonal pads chosen to hold absorbency across the robot’s full service schedule.