Eufy X8 Pro – Plus.Parts® Replacement Dust Bags

The Eufy X8 Pro is Eufy’s current product name for the X8 Pro platform: a robot running dual 4,000 Pa turbines for a combined 8,000 Pa of suction, fitted with an Active Detangling roller that combs debris off the bristle row during every cleaning pass. That Twin-Turbine architecture forces more air per minute through the HEPA filter than a single-motor robot of comparable size, which means the filter reaches saturation faster and the 335 ml onboard bin fills more quickly per square metre of floor covered. The auto-empty station resolves the bin side of that load: it transfers debris from the robot’s bin into a sealed dock bag on every return, keeping the robot ready for the next run without manual emptying. Running the station on a daily schedule turns over bags at a predictable rate, and a fifteen-bag supply maintains that routine for an extended period.

These replacement dust bags from Plus.Parts® fit the X8 Pro station dock bay, the same format shared by the Eufy Clean X8 Pro, T2266, T2276, and the X10 Pro Omni family. Each bag seats in the station housing, receives the debris from the robot’s bin transfer, and holds its sealed closure through the pressure the station applies at the close of the empty cycle. The set of fifteen provides the supply to maintain the station without interruption.

The laminated bag material holds its seal under the station’s suction pressure and resists the edge-tears that thinner alternatives develop near full capacity, keeping the dock’s internal channel clean throughout the stocking period. A team handles questions directly and personally on anything about compatibility or your order.

At a glance

• Matched to Your Device – Bag dimensions confirmed for the Eufy X8 Pro station bay, covering the same dock format used across the full X8 Pro and X10 Pro Omni series.
• Consistent Performance – Rated to handle the higher debris volume a Twin-Turbine daily-schedule robot generates, maintaining seal integrity from the first bag in the set to the last.
• Reliable Quality – Laminated construction that resists seal-edge failure under repeated station pressure cycles, keeping fine dust out of the dock’s internal channel over the full stocking period.