iRobot Roomba Q352020 – Plus.Parts® Replacement Parts Set

The iRobot Roomba Q352020 is a retailer-specific variant in the iRobot Roomba Essential family, using the same platform and consumable set 4837325 as the Roomba Essential range. The compact 0.4-litre dustbin shared across the Essential family limits effective run length; on floors with pets or high traffic, the bin fills within a single room pass, and an overfull bin forces material against the filter from inside the chamber, loading it faster than a correctly emptied run would. Hair that migrates into the side-brush drive housing from an unwrapped post shaft increases drag on the wheel motor on the same side; clearing the side-brush post weekly prevents both bristle splay at the tips and motor drag from shaft loading. A filter that has shifted from white to uniform mid-grey has reached its rated capacity and should be replaced regardless of the calendar interval, since the electrostatic charge layer responsible for sub-micron particle capture cannot be restored by cleaning.

This kit contains Plus.Parts® components designed as a direct-fit alternative to the original iRobot consumable set 4837325, supplying 1 multi-surface rubber roller, 3 side brushes, 5 HEPA filters and 3 mop pads – 12 parts in total. Five filters provide approximately 15 months of replacements at the recommended two-to-three-month interval; three side brushes cover three to six months at the quarterly-to-biannual schedule. Clear roller end caps weekly, unwrap the side-brush post weekly, and tap the filter every one to two weeks. Curated by VacuumReviews.eu for the iRobot Roomba Q352020. Supplied by Plus.Parts® as a direct-fit alternative to the original parts.