Philips HomeRun 3000 Series Aqua XU3100/01 – Plus.Parts® Maintenance Set

The Philips HomeRun 3000 Series Aqua XU3100/01 is the dark-metallic edition of the HomeRun 3000 Series Aqua, sharing the same 4,000 Pa brushless motor, 360° LDS laser navigation and 4,800 mAh battery rated for up to 200 minutes. Its Auto-Empty station transfers dust into a 3.0 L S-bag, keeping the 350 ml onboard bin clear between dock visits. A passive flat mop fed by a 300 ml water tank handles everyday hard-floor maintenance, and 17 mm obstacle crossing lets the robot transition between surfaces without getting stuck.

This set covers Plus.Parts® direct-fit alternatives to the original Philips parts: two rubber main rollers, two side brushes, two mop pads and eight filters – 14 parts in all. The eight EPA11 filters included here deserve particular attention. Although the media is marketed as washable, each rinse degrades the electrostatic charge that traps fine particles. After three or four washes the filter still looks clean, yet its fine-particle efficiency has already dropped noticeably. Philips rates replacement at three to six months; households with pets or high ambient dust should lean toward the shorter end. After every wash, leave the filter to air-dry completely – at least 24 hours in a well-ventilated spot. Reinstalling a damp filter invites mould growth inside the bin cavity and can produce a persistent musty odour that is very difficult to remove.

Eight filters in one set means you can rotate through them over roughly two years of normal use without needing to reorder. Behind the set is a real team at VacuumReviews.eu, so if you are uncertain whether your filter has lost its electrostatic charge or simply needs another rinse, reach out and we will help you decide.

At a glance

• Complete Coverage – Eight filters give you a two-year rotation at the recommended three-to-six-month replacement cycle, so you will not need to reorder any time soon.
• Matched to Your Device – Each EPA11 filter is cut to the exact frame dimensions of the XU3100/01 bin cavity, sealing flush without air gaps that would bypass the filtration layer.
• Responsive Support – Ask VacuumReviews.eu whether your filter still holds its electrostatic charge and we will walk you through a simple airflow test you can do at home.