Rowenta X-Plorer Serie 95 RR7987WH – Plus.Parts® Maintenance Set

€43,95

Rowenta X-Plorer Serie 95 RR7987WH spare parts

Keep your Rowenta X-Plorer Serie 95 RR7987WH running at its rated 8,000 Pa with a maintenance set matched to its Aqua Force mop, camera navigation and full-width brush roll. This set gathers the consumables the robot wears through: a main roller brush, four HEPA filters with sponge pre-filters, four side brushes and four mop pads.

Plus.Parts® quality, matched to your machine.

Want to learn more about your Rowenta X-Plorer Serie 95 RR7987WH? Check out our review and maintenance guide.

In stock

Add to Cart
Rowenta X-Plorer Serie 95 RR7987WH - Plus.Parts® Maintenance Set
Rowenta X-Plorer Serie 95 RR7987WH - Plus.Parts® Maintenance Set
€43,95
This item is selling fast!
  • Free shipping from €59
  • Post-payment available
  • Order yours before 3:00PM for same day dispatch, if in stock
  • Returns possible within 14 days of receipt

 

Guaranteed Safe Checkout

Rowenta X-Plorer Serie 95 RR7987WH - Plus.Parts® Maintenance Set
Rowenta X-Plorer Serie 95 RR7987WH – Plus.Parts® Maintenance Set
€43,95

    The Rowenta X-Plorer Serie 95 RR7987WH is the white-finish standard variant of the Serie 95 line, mechanically identical to the RR7987 and sharing a single maintenance kit with every other model in this set. It runs at 8,000 Pa with camera-and-gyroscope navigation, an Aqua Force mop system that feeds water continuously from the onboard tank, and a 0.4-litre dust box emptied by hand after each run.

    This set supplies Plus.Parts® direct-fit alternatives to the original Rowenta parts: a main roller brush, four sponge pre-filters, four HEPA filters, four side brushes and four mop pads – 17 parts in all. The Aqua Force channel inside the water tank is the maintenance point that catches owners by surprise on this model. In hard-water areas, mineral scale narrows one side of the distribution geometry before the other, creating uneven wetting on a pad that is otherwise still in good condition. The symptom is a visible damp streak or smear along the robot’s edge-following path on hard floors, appearing on one side only. A ten-minute flush with a one-to-ten white vinegar and water solution through the tank, followed by a clean-water rinse run over a waste area, resolves early-stage scale. In hard-water households, making this a monthly routine prevents scale from building to the point where a more aggressive descaling treatment is needed. If the same streak pattern appears on a new pad immediately after fitting, the channel scale is the first thing to check rather than the pad itself.

    Tap the HEPA filter edges weekly and replace every two to three months. Inspect the main brush weekly, cut wrapped hair and clear both end-cap bearing holes; replace every six to eight months. Clear the side-brush posts weekly and swap the pair every three to six months. Remove the mop pad after every run, rinse and air-dry fully before the next session; replace every two to three months. Empty the dust box after every run, rinse the shell weekly and check the rubber lid seal monthly for trapped hair. Wipe the camera window and cliff sensors weekly.

    At a glance

    • Direct-Fit Compatibility – Every part fits the RR7987WH and all other Serie 95 models in this maintenance set, so fitting is tool-free.
    • Built to Last – Filters sized for the 8,000 Pa motor and mop pads chosen to hold their cleaning face through daily Aqua Force wetting.

    Additional information

    Weight 200 g
    Dimensions 400 × 200 × 300 mm
    Manufacturer

    Plus.Parts

    Manufacturer Part Number(s)

    ZR792000 / ZR793000

    Package Quantity

    18

    Suitable Device Brand

    Rowenta

    Suitable Device Model

    X-Plorer Serie 95 RR7987WH

    Reviews

    There are no reviews yet.

    Be the first to review “Rowenta X-Plorer Serie 95 RR7987WH – Plus.Parts® Maintenance Set”

    Your email address will not be published. Required fields are marked *