Tefal X-Plorer Serie 95 Total Care RG7987 – Plus.Parts® Maintenance Set

The Tefal X-Plorer Serie 95 Total Care RG7987 is the top-tier Tefal Serie 95 model, raising maximum suction to 12,000 Pa in Boost mode. It ships with the three-pad kit – standard, Animal Scrub and anti-allergic electrostatic – and mops via the Aqua Force system that delivers water continuously from the onboard tank. Camera-and-gyroscope navigation guides the robot, and the 0.4-litre dust box is emptied by hand after each session. All consumables are shared across every Serie 95 model regardless of brand.

This set covers the full service scope with Plus.Parts® direct-fit alternatives to the original Tefal parts: a main roller brush, four sponge pre-filters, four HEPA filters, four side brushes and four mop pads – 17 parts in all. The battery is sealed inside the chassis and is not part of this consumable kit, but how the charging path is maintained directly influences how long it keeps delivering full runtime. The lithium-ion cell holds adequate runtime for roughly two to three years; the clearest signal of genuine decline is the robot returning to dock mid-clean on a floor plan it previously completed on a single charge. Before assuming the cell is tired, wipe the charging contacts on the robot underside and the dock base landing pads with a dry cloth monthly. Oxidation on either surface raises contact resistance and forces the charging circuit to work harder, which accelerates cell degradation over time. When runtime drops on a robot that still charges to the indicator’s full reading, contact oxidation is the first thing to rule out. Keeping the consumable schedule tight – clean filters, clear brush bearings, fresh mop pads – also reduces motor current draw on every run, which protects the battery from repeated deep discharge cycles.

Tap the HEPA filter edges weekly and replace every two months on Boost mode. Inspect the main brush weekly, clear both end-cap bearing holes and replace every six to eight months. Clear the side-brush posts weekly and swap every three to six months. Remove the Aqua Force mop pad after every run, rinse and air-dry; with the three-pad kit, rotate through all three to give each a complete drying cycle.

At a glance

• Matched to Your Device – Every part fits the RG7987 and all other Serie 95 models in this maintenance set without modification.
• Long-Lasting Components – Filters sized for the 12,000 Pa Boost motor and mop pads chosen to hold scrub through the three-pad rotation cycle.