Blaupunkt Bluebot XVAC – Plus.Parts® Maintenance Set

The Blaupunkt Bluebot XVAC is the gyroscopic-navigation member of the XTREME maintenance family. It runs at up to 1,800 Pa rather than 3,000, carries no LDS laser turret, and mops from a separate reservoir clipped under the chassis instead of an integrated combi tank. It shares the same four consumables as the laser models – a three-layer filter stack, a matched side-brush pair, a spiral rolling brush and a mopping cloth.

This set covers the full service scope with Plus.Parts® direct-fit alternatives to the original Blaupunkt parts: two spiral rolling brushes, a matched left-and-right side-brush pair, eight HEPA filters with foam sponges and two washable mopping cloths – 22 parts in all. The lower suction tier is the practical difference: at 1,800 Pa the robot pulls less airflow through the filter each session, so the three-layer stack runs roughly four to six weeks longer than on the XTREME at the same usage, and with no dome on top there is no weekly laser-dome wipe to do. That makes the XVAC the lowest-maintenance model in the range, but the schedule itself does not change – only the intervals stretch slightly.

Rinse the gauze, sponge and HEPA together, air-dry fully, clean monthly and replace the stack every three months regardless of appearance, since a washed HEPA loses rated efficiency. Clear the spiral rolling brush end caps every one to two weeks and replace the roll every six to twelve months. Replace the matched side brushes every three to six months. Empty the optional mop reservoir after every mopping run to stop mineral scale forming in the outlet channel, wash the cloths at 40°C maximum and air-dry only. Wipe the anti-drop and anti-collision sensors and clean the charging contacts fortnightly with a dry cloth. Behind the set is a real team at VacuumReviews.eu, so if suction tails off or the robot misses the dock, reach out and we will help you sort it.

At a glance

• Matched to Your Device – The spiral rolling brushes, side-brush pair, three-layer filters with sponges and mopping cloths fit the Bluebot XVAC and its gyroscopic chassis exactly.
• Long-Lasting Components – Filter stacks sized for the 1,800 Pa airflow and microfibre cloths chosen to hold their finish through repeated 40°C washes.
• Responsive Support – A real team stands behind every order, ready to help with model identification, delivery questions or anything else you need sorted.