Dreame L10 Ultra – Plus.Parts® Maintenance Set

The Dreame L10 Ultra is the first generation of Dreame’s premium square-mop platform, running at 5,300 Pa with a flat liftable mop and a dock station that washes pads and applies fan-assisted drying. The lower suction tier compared with the second-generation models gives the L10 Ultra the most relaxed filter replacement window on the platform: four to six months under daily residential use, versus three to five months on the 7,000 Pa siblings.

This set supplies Plus.Parts® direct-fit alternatives to the original Dreame parts: a rubber main brush, 4 side brushes, 4 mop pads, 4 HEPA filters and 4 dust bags – 17 parts in all. The HEPA filter is the component whose service interval is most directly affected by the L10 Ultra’s 5,300 Pa suction rating. At this suction tier, each cleaning session draws a moderate volume of air through the filter medium, which distributes particulate loading more gradually across the pleat surface than on the higher-suction models. Tap the filter on all four edges over a waste bin every one to two weeks to dislodge loose surface dust. Do not rinse the filter under water unless the packaging explicitly confirms it is washable; wetting degrades the HEPA medium’s electrostatic charge permanently, even if the filter appears intact after drying. The reliable replacement signal is colour: a filter face that has shifted from its original white to a consistent mid-grey is spent regardless of elapsed calendar weeks. In homes with pets or deep-pile carpets, the four-month mark is a realistic replacement point; in a hard-floor apartment with minimal shedding, five to six months is achievable. Some regional L10 Ultra configurations do not include a sealed auto-empty dustbag dock; where the onboard dustbin is emptied manually, the dustbag interval in this set does not apply, but four bags are included for configurations that do include the auto-empty function.

Behind the set is a real team at VacuumReviews.eu, so if suction feels weaker despite a filter that still looks pale, reach out and we can help check whether the suction inlet or main brush chamber has a hidden blockage.

At a glance

• Matched to Your Device – Every part is dimensioned for the Dreame L10 Ultra chassis and its first-generation dock, seating flush without modification.
• Complete Coverage – 17 parts across five consumable categories refresh the entire wear layer in a single order.