Dreame RLM61HE replenishment kit

The Dreame RLM61HE is an alternative market designation for a robot built on the Matrix consumable platform. Regardless of the label on the base, the hardware inside follows the same blueprint as the Matrix10 Ultra: 30,000 Pa of suction, a HyperStream Detangling DuoBrush with dual counter-rotating rollers and a central divider channel, a multi-mop switching PowerDock that carries three pad types on an internal carousel and washes each pair in 100 °C water through twenty spray nozzles, and a ProLeap system clearing obstacles up to 80 mm. The auto-refill detergent reservoir and 10.5 mm carpet mop lift are present on this designation.

The consumable schedule is the same as every other Matrix10 Ultra variant. The HEPA filter should be replaced every two to three months; tap out loose dust between changes but never wash the filter medium with water, as this degrades the HEPA layer even when it looks intact. The three mop pad pairs each wear at their own rate. The nylon-bristle scrub pair reaches its replacement threshold first because the bristle compound abrades against hard floor surfaces on every run. The DuoBrush divider channel accumulates compressed fibre over time and must be cleared at each weekly brush clean; once the channel packs, hair wraps onto both rollers simultaneously, which is a harder condition to clear than standard single-roll wrap. The dock dust bag fills more quickly under daily auto-emptying than the quoted figure suggests, with realistic cadence closer to every three to five weeks in homes with pets.

Quality and availability should not depend on which designation your unit carries. This replenishment kit from Plus.Parts® provides direct-fit alternatives to the original Dreame RAK76 consumables. The VacuumReviews.eu team know the Matrix family thoroughly and will confirm the fit for any RLM61HE variant personally if you reach out before ordering.

At a glance

• Straightforward Installation – Every part drops into the Dreame RLM61HE the same way it fits any Matrix10 Ultra series robot, with no tools, trimming or guesswork needed to complete the swap.
• Long-Lasting Components – Tighter filter weaves, heat-resilient mop fibres and a flexible roller compound ensure each part holds its performance across the recommended replacement window.
• Recommended by Our Team – Our review team recommends this replenishment kit for RLM61HE owners, drawing on direct experience with the Matrix10 consumable platform it shares.