Dyson SV30 – Plus.Parts® Washable HEPA Filter

The Dyson SV30 is a V12 Detect Slim platform cordless stick vacuum, sharing the same Hyperdymium motor architecture, whole-machine HEPA filtration, and 150 AW suction specification as the broader V12 Detect Slim range. The V12 platform’s whole-machine HEPA approach seals the entire machine so that no air can exit without passing through the HEPA filter at the machine’s exhaust point, meaning the filter is engaged on every cleaning session without exception. The SV30’s HEPA filter condition directly influences available suction by determining how freely air can flow through the exit path; a heavily loaded or overdue filter increases restriction in the airpath and lowers the motor’s effective output. The washable HEPA filter should be rinsed under cold tap water only, never hot water or detergent, and must air-dry for a minimum of 24 hours before reinstallation.

This Plus.Parts® washable HEPA filter is a direct-fit replacement for the Dyson SV30. The filter is built to match the original filter’s dimensions and sealing geometry, fitting the SV30’s HEPA filter housing at the machine exit without modification. Servicing the HEPA filter through cold-water washing between replacements and full replacement at the recommended interval is a standard part of maintaining the V12 Detect Slim platform’s whole-machine filtration performance.

HEPA filter media matched to the SV30’s whole-machine filtration specification. Our team covers the full Dyson V-series range and is available for any compatibility or order question.

SV30: HEPA covered

• SV30 Direct-Fit – Built to match the Dyson SV30’s HEPA filter housing dimensions for direct installation at the machine exit point without modification.
• V12 Platform Specification – Matched to the V12 Detect Slim platform’s whole-machine HEPA filtration, where all exhaust air passes through the filter before returning to the room.
• Washable and Replaceable – Cold tap water only; air-dry for a minimum of 24 hours before reinstalling to prevent moisture from affecting the machine’s motor and electronics.