Ecovacs Deebot T80s Omni – Plus.Parts® Maintenance Set

The Ecovacs Deebot T80s Omni runs the same OMNI Station consumable platform as the X9 Pro Omni: an OZMO Roller mop washed by the station with hot water, ZeroTangle anti-tangle brushing across the Cyclone-Directed main brush and the ARClean side brush, and a station that auto-empties the bin, auto-refills and finishes with a hot-air dry. Because it shares that hardware, it shares the service rhythm: the antibacterial HEPA filter (DFI030037) is rated for about 120 hours, roughly two to three months of daily use, rinsed in clean water only and dried fully for 24 hours; the OZMO Roller (DKT060220) is inspected every eight to ten wash cycles and replaced every two to three months because the station washes off soiling but cannot reverse fibre wear; the Cyclone-Directed main brush (DMB010030) runs six to twelve months with the end caps cleared weekly; the ARClean side brush (DSB020040) is cleared every two weeks and replaced every three to six months; and the station dustbag (DDB030041) is changed every 30 to 60 days.

This maintenance set keeps each interval supplied with Plus.Parts® components built as a direct-fit alternative to the original Ecovacs parts, DFI030037, DKT010176, DKT100221, DKT060220, DMB010030 and DSB020040: one anti-tangle main brush, one OZMO Roller mop, four side brushes, four antibacterial filters and four antibacterial dust bags – fourteen parts cut to the T80s Omni’s own brush mounts, roller seat and filter bay so fitting them is no different from swapping the originals. The filters carry the load on air quality – the antibacterial HEPA element is the main fine-filtration stage, so a denser media keeps suction steady across the full 120-hour interval, while a loose generic filter lets fine dust slip back into the room and forces the motor to draw extra current.

The OZMO Roller is built to hold an even, lightly hydrated scrubbing surface under the station’s repeated hot-water washes instead of fraying early, and the ZeroTangle fins stay supple so hair keeps tracking to the central channel rather than packing the bearings.

At a glance

• Matched to Your Device – OZMO Roller, ZeroTangle brushes, side brushes, antibacterial filters and dust bags are all sized to the T80s Omni’s mounts and OMNI Station, so every part drops in without adjustment.
• Long-Lasting Components – Antibacterial HEPA media, a durable OZMO Roller and supple ZeroTangle fins chosen to hold up across the robot’s full service schedule.