Eufy T2351G21 – Plus.Parts® Maintenance Set

The Eufy T2351G21 is a model-code variant on the X10 Pro Omni spinning-pad platform, carrying the same 8,000 Pa suction, dual pentagonal pads at 180 RPM under 1 kg pressure, single anti-tangle roller and UniClean dock with auto-empty, wash, refill and roughly 45°C hot-air drying. It shares its consumable set with the X10 Pro Omni and the T2351G11 and T2351T11 codes, so the service routine below is identical across them.

This set keeps each interval supplied with Plus.Parts® consumables built as a direct-fit alternative to the original Eufy part: two main brushes, four side brushes, four washable filters, four mop pads and two antibacterial dust bags, sixteen parts in all. The single roller is cleared every one to two weeks, both orange end caps unclipped so hair can be removed from the bearing sockets, and replaced every five to seven months. The washable filters are tapped firmly on all four sides every one to two weeks and replaced every two to three months, because 8,000 Pa of airflow loads the medium faster than a lower-suction robot and a grey filter is already costing the motor extra current.

The dual pentagonal pads wear from the outer edges inward under spin, so they are inspected at eight weeks and replaced every three to six months once stiff, smooth or persistently discoloured. The side brush is checked weekly for wrapped hair and replaced every three to six months; the dock dustbag is swapped every four to eight weeks before an overfull bag blocks the next auto-empty; and the dirty-water tank is emptied and rinsed every two to three days, the single habit that matters most on this platform because stagnant water sours fast and rides a clean pad back to the floor. Wipe the spray nozzles monthly – fortnightly in hard water – and lift wash-tray film with dilute citric acid. Behind the set is a real team at VacuumReviews.eu: if you are unsure whether your robot is badged T2351G21 or X10 Pro Omni, the parts are the same, so reach out and we will confirm it and sort anything else.

At a glance

• Matched to Your Device – The roller, washable filters, pentagonal pads, side brushes and dock dustbags fit the T2351G21 brush bay, filter chamber and UniClean mop deck, so each part seats without guesswork.
• Long-Lasting Components – Filters built for sustained 8,000 Pa airflow and hard-wearing pentagonal pads chosen to keep absorbency across the full spinning-mop service cycle.