Ecovacs Deebot X2 Pro Plus – Plus.Parts® Maintenance Set

The Ecovacs Deebot X2 Pro Plus builds on the X2 platform with a D-shape chassis, an extended-length centre roller, an enhanced carpet-lift mechanism and an Omni dock with expanded accessory storage – all while keeping the 8,000 Pa suction, OZMO Turbo counter-rotating chenille mop and 55°C hot-water wash. The expanded dock storage holds more on-dock stock but changes no service interval. At 8,000 Pa the HEPA filter darkens quickly, so it is tapped on all four sides every one to two weeks, rinsed with water only and air-dried fully before refitting, and replaced about every 120 hours of cleaning, roughly every two to three months under daily use, with the app Accessories view the reliable trigger.

This maintenance set keeps each of those intervals supplied with Plus.Parts® components built as a direct-fit alternative to the original Ecovacs part: one main brush, four side brushes, six filters, two mop pads and four dustbags, seventeen parts in all. The extended rubber roller has proportionally longer end caps, so an extra minute is budgeted at each tip during the one-to-two-week clean to clear wound hair from the bearing seats; replace it every five to seven months. The counter-rotating chenille pads compact under spin pressure, but the enhanced carpet lift keeps them clear of wet carpet edges during threshold crossings, extending practical pad life by two to four weeks over the square-body variants – inspect at eight weeks and replace once the pile flattens, the pad stiffens after a wash, or discolouration lingers.

The D-shape leading edge tracks flat walls closely, so the side brush takes less wall impact and wears more slowly than on the square-body X2 – still, check it weekly, clear thread from the base post and replace every three to six months.

At a glance

• Direct-Fit Compatibility – Every part matches the X2 Pro Plus D-shape brush chamber, filter bay and OZMO mop deck, so fitting is tool-free and works exactly like swapping the original DKT060099 parts.
• Built to Last – A HEPA filter for 8,000 Pa airflow, hard-wearing OZMO Turbo chenille pads suited to the enhanced carpet-lift mop and a durable extended rubber roller chosen to last the full replacement cycle.
• Recommended by Our Team – This is the set our review team points X2 Pro Plus owners toward, drawn from hands-on experience with how the D-shape platform and extended roller wear.