Ecovacs DEX61-31EC – Plus.Parts® Maintenance Set

The Ecovacs DEX61-31EC is the European-market product code for the Deebot X9 Pro Omni, sold through Ecovacs’ European retail channel under a regional identifier, so it is mechanically the same robot: 16,600 Pa suction, the OZMO Roller mop at 220 RPM and 3,700 Pa of pressure, ZeroTangle 3.0 across the Cyclone-Directed main brush and ARClean side brush, and the OMNI Station that hot-water washes, auto-empties, auto-refills and hot-air dries. Every consumable and interval carries straight over from the X9 Pro Omni: the antibacterial HEPA filter (DFI030037) is rated for about 120 hours, roughly two to three months, rinsed in clean water only and dried 24 hours; the OZMO Roller (DKT060220) is inspected every eight to ten wash cycles and replaced every two to three months; the Cyclone-Directed main brush (DMB010030) lasts six to twelve months with the end caps cleared weekly; the ARClean side brush (DSB020040) is cleared every two weeks and replaced every three to six months; and the station dustbag (DDB030041) is changed every 30 to 60 days.

This maintenance set covers every one of those intervals with Plus.Parts® components built as a direct-fit alternative to the original Ecovacs parts, DFI030037, DKT010176, DKT100221, DKT060220, DMB010030 and DSB020040: one anti-tangle main brush, one OZMO Roller mop, four side brushes, four antibacterial filters and four antibacterial dust bags – fourteen parts, all matched to the DEX61-31EC’s own mounting points, which are identical to the X9 Pro Omni’s. The filters do the heavy lifting on air quality – the antibacterial HEPA element is the main fine-filtration stage, so a denser media keeps the 16,600 Pa suction steady across the full 120-hour interval, while a loose generic filter lets fine dust drift back into the room and makes the motor work harder than it needs to.

The OZMO Roller holds an even scrubbing surface through the station’s repeated hot-water washes rather than fraying early, and the ZeroTangle fins stay flexible so hair keeps tracking to the central channel instead of ringing the bearings.

At a glance

• Matched to Your Device – OZMO Roller, ZeroTangle brushes, side brushes, antibacterial filters and dust bags are all sized to the DEX61-31EC / X9 Pro Omni, so each part fits without adjustment or guesswork.
• Long-Lasting Components – Antibacterial HEPA media, a durable OZMO Roller and supple ZeroTangle fins that hold up across the robot’s full service schedule.