Ecovacs Deebot X9 Pro Omni – Plus.Parts® Maintenance Set

The Ecovacs Deebot X9 Pro Omni tops the OMNI Station family, pairing 16,600 Pa suction with an OZMO Roller mop that presses 3,700 Pa onto the floor at 220 RPM and an OMNI Station that hot-water washes the roller, auto-empties the bin, auto-refills and hot-air dries between sessions. ZeroTangle 3.0 runs across both a Cyclone-Directed main brush and the ARClean side brush. That high-pressure roller and substantial airflow set the service rhythm: the antibacterial HEPA filter (DFI030037) is rated for about 120 hours, roughly two to three months of daily use, rinsed in clean water only and dried 24 hours; the OZMO Roller (DKT060220) is inspected every eight to ten wash cycles and replaced every two to three months because washing removes soiling but not fibre wear; the Cyclone-Directed main brush (DMB010030) runs six to twelve months with the end caps cleared weekly; the ARClean side brush (DSB020040) is cleared every two weeks and replaced every three to six months; and the station dustbag (DDB030041) is changed every 30 to 60 days.

This maintenance set keeps each of those intervals supplied with Plus.Parts® components built as a direct-fit alternative to the original Ecovacs parts, DFI030037, DKT010176, DKT100221, DKT060220, DMB010030 and DSB020040: one anti-tangle main brush, one OZMO Roller mop, four side brushes, four antibacterial filters and four antibacterial dust bags – fourteen parts sized to the X9 Pro Omni’s own mounts, station seat and filter bay. The filters carry the load at this airflow – the antibacterial HEPA element is the main fine-filtration stage, so a denser media holds the 16,600 Pa suction steady across the full 120-hour interval, while a loose generic filter lets fine dust slip back into the room and forces the motor to draw extra current to keep up.

At a glance

• Direct-Fit Compatibility – Every part matches the X9 Pro Omni’s brush mounts, OZMO Roller seat, filter bay and OMNI Station, so fitting is tool-free and works exactly like swapping the original DDB030041 / DKT100221 / DKT060220 parts.
• Built to Last – Antibacterial HEPA media, a hard-wearing OZMO Roller and supple ZeroTangle fins that hold their performance across the full replacement cycle.
• Recommended by Our Team – This is the set our review team points X9 Pro Omni owners toward, drawn from hands-on experience with how the high-pressure roller platform wears.