Eufy RoboVac 11S Plus – Plus.Parts® Maintenance Set

The Eufy RoboVac 11S Plus belongs to Anker’s sweep-only, super-thin RoboVac generation, built before the Clean and Omni ranges arrived. It peaks at 1300Pa, is driven by remote rather than app, and finds its way with infrared and drop sensors, so there is no mop and no auto-empty to lean on. A single rolling brush carries the entire sweeping load into a 0.6-litre dustbin, which means clean consumables are the whole story on this platform.

This set is a Plus.Parts® alternative to the original Eufy part and supplies 2 rolling brushes, 6 side brushes and 6 filters with foam – 14 parts. Because the 11S Plus stays at 1300Pa and never hits carpet BoostIQ, its consumables typically last toward the longer end of the window: tap the high-performance filter out weekly and replace it around every twelve weeks, rinse the foam pre-filter and air-dry it fully, and swap both side brushes together as a pair to keep the sweep balanced. Never wash the high-performance filter – water breaks down its electrostatic layer and drops suction for good.

Behind the set is a real team at VacuumReviews.eu, so if the suction never fully recovers after a filter swap, get in touch and we will help trace it to the brush or the bin gasket.

At a glance

• Matched to Your Device – Every part is dimensioned for the RoboVac 11S Plus chassis, seating flush into the 0.6-litre bin without modification.
• Complete Consumable Coverage – Two rolling brushes, six side brushes and six filters cover a full replacement cycle, so nothing runs down mid-clean.
• Responsive Support – VacuumReviews.eu can help work out whether weak suction is a loaded filter or a hair-wrapped roller.