iRobot Roomba 105 Vac – Plus.Parts® Replenishment Kit

The iRobot Roomba 105 Vac is a vacuum-only model using ClearView LiDAR navigation at up to 7,000 Pa with a charge-only dock. The structured LiDAR cleaning path reduces side-brush wear compared to reactive-navigation models, as the robot contacts walls and furniture less frequently per session. However, the 0.4-litre dustbin requires manual emptying after every run; on pet-hair floors the bin reaches capacity within a single full-room pass, and a full bin forces debris against the filter from inside the chamber, loading it faster. At 7,000 Pa on maximum mode, airflow volume through the single HEPA filter is substantially higher than on entry-level platforms, making the two-to-three-month replacement interval firm under daily use; a partially clogged filter forces the motor to draw additional current, generating heat and gradually shortening motor service life even before suction loss becomes noticeable to the user.

This kit contains Plus.Parts® components designed as a direct-fit alternative to the original iRobot consumable set 4837325, supplying 1 multi-surface rubber roller, 3 side brushes, 5 HEPA filters and 3 mop pads – 12 parts in total. Five filters provide approximately 15 months of replacements at the recommended two-to-three-month interval. Clear the rubber roller end caps weekly by removing both end caps and clearing hair from the bearing holes; a roller that does not spin freely by hand after cleaning has material compacted deeper inside and needs replacement. Curated by VacuumReviews.eu for the iRobot Roomba 105 Vac. Supplied by Plus.Parts® as a direct-fit alternative to the original parts.