iRobot Roomba 561 – Plus.Parts® Replacement Kit

Day-of-week scheduling is standard on the iRobot Roomba 561, and retail bundles for models in this range typically included a spare filter and brush set, which means the robot has often had at least one consumable replacement already. What scheduling cannot monitor is the physical condition of the brushes after months of use. The bristle brush degrades through abrasion and UV exposure, not through run time alone; a brush that has been in daily service for six months in a carpeted home may look intact while the bristle compound has already stiffened past the point where it agitates pile effectively. Pull both brushes and flex them by hand every fortnight. A beater brush that feels firm and resistant to flex rather than springing freely is past its service point regardless of how it looks.

This kit contains Plus.Parts® components as a direct-fit alternative to the original iRobot consumables: a bristle brush, a flexible beater brush, a pleated fibre filter, a 3-arm side brush and yellow end-cap bearing components. All matched to the Roomba 561’s standard-bin configuration.

Built for consistent performance across the full brush and filter cycles. The VacuumReviews.eu team is available for any question about your 561’s specific setup or your order.

At a glance

• Flex-Test Your Beater Brush – Replace the beater brush when it resists manual flex rather than springing freely: stiffness indicates end of life regardless of appearance.
• Matched Pair Replacement – Bristle and beater brushes are rated and supplied as a set; replacing only one accelerates wear on the new component.
• Expert Support – The VacuumReviews.eu team is available for any question about your Roomba 561’s service schedule or your order.