Liectroux XR500 – Plus.Parts® Maintenance Set

The Liectroux XR500 sits above the C30B and E30 with Wi-Fi connectivity and app-based scheduling alongside the standard gyro-assisted navigation platform. Because the XR500 supports scheduled runs via the companion app, it tends to complete more cleaning sessions per week than the C30B and E30, which are typically operated manually. All consumables are shared across the three models, so every part in this set fits without modification.

This set supplies Plus.Parts® direct-fit alternatives to the original Liectroux parts BPK-BHXB1 / BPK-BHXB2 / BPK-BHXB3: two main brushes, two side brushes, eight HEPA filters and two mop pads – 14 parts in all. The app-based scheduling capability is the variable that changes the practical replacement calendar on the XR500 compared with the C30B and E30. Higher session frequency means all consumables reach their replacement intervals sooner in calendar terms, even though the per-session loading rate is identical across all three models. Owners running the XR500 on a twice-daily schedule should treat the two-month filter cycle as approximately a one-month interval, the three-month side brush cycle as approximately a six-week interval, and the three-to-six-month brush roll cycle as approximately a two-to-four-month interval to maintain consistent performance across the elevated session count.

Clear the main brush roll every two weeks – in homes with a high daily hair load, a weekly clearing session is more practical than the standard two-week guideline. The brush roll should be replaced every three to six months, with hard-floor surfaces favouring the shorter end. Tap the dual-layer filter every two to three sessions and replace the full assembly at the adjusted interval for your session frequency. The HEPA-grade layer must never be washed with water. Replace side brushes at the three-month mark. Wipe cliff sensors every two to four weeks and dock contacts monthly. Store the robot with a partial charge of around 50 per cent if it will not be used for more than ten days, as sustained full-charge storage accelerates lithium-ion cell ageing.

At a glance

• Matched to Your Device – Every part fits the XR500 and the C30B and E30 in this series without modification.
• Long-Lasting Components – Filters and brushes rated for the higher session frequency that app-based scheduling enables.