Rowenta X-Plorer Serie 75 S+ RR8595 – Plus.Parts® Maintenance Set

The Rowenta X-Plorer Serie 75 S+ RR8595 is the upper-tier configuration of the Serie 75 S+ range. It combines 360° LDS laser navigation with a high-airflow BLDC motor, an Aqua Force controlled-moisture mop and a Suction Station dock that auto-empties the bin into a sealed bag. Every Serie 75 S+ variant follows the same service schedule, so this kit fits the model without modification.

This set supplies Plus.Parts® direct-fit alternatives to the original Rowenta parts: two main brush rolls, four side brushes, eight filters, four Suction Station dustbags and four mop cloths – 22 parts in all. With this mop system the water tank, not the pad, is usually behind a lingering smell. Water left in the internal feed channel between runs develops a biofilm within two to three days in warm conditions, and once it forms it transfers to the pad on the next session and produces a damp odour that swapping the pad alone will not clear. Empty the tank after every mop run, rinse it weekly and stand it open to air-dry, and use only plain tap water – cleaning solutions and descalers foam inside the Aqua Force channel and upset the wetting rate. In hard-water areas, flush the channel monthly with one part white vinegar to ten parts water.

Remove and rinse the mop pad after every run, air-dry it fully, and replace it every two to three months – every six to eight weeks in a busy or pet home. Tap the sponge pre-filter and pleated HEPA weekly, wash only the sponge, and replace both every two to three months. Inspect the full-width brush roll weekly and clear the end-cap bearings, replacing the roll every six to eight months. Clear the side-brush posts weekly and replace the pair every three to six months. Wipe the LDS dome and cliff sensors weekly, and replace the sealed Suction Station bag on a fixed eight-week calendar. Behind the set is a real team at VacuumReviews.eu, so if a damp odour returns after a fresh pad, reach out and we will help you clear the water channel.

At a glance

• Direct-Fit Compatibility – The main brushes, side brushes, filters, Suction Station dustbags and mop pads fit the RR8595 and every Serie 75 S+ sibling, so fitting is tool-light.
• Built to Last – Filters sized for the high-airflow BLDC motor and mop pads chosen to keep their scrub across repeated controlled-moisture runs.