Rowenta X-Plorer Serie 95 RR79OF0 – Plus.Parts® Maintenance Set

The Rowenta X-Plorer Serie 95 RR79OF0 is the foundational variant of the Serie 95 platform. It runs a brushless BLDC motor at 8,000 Pa, navigates using a forward-facing camera alongside gyroscope data, and mops via the Aqua Force system that feeds water continuously from an onboard tank to the floor pad throughout every cleaning cycle. The 0.4-litre dust box is emptied by hand after each run. All seven Serie 95 models share the same consumable kit, so every part in this set fits the RR79OF0 and all its siblings without modification.

This set covers the full service scope with Plus.Parts® direct-fit alternatives to the original Rowenta parts: a main roller brush, four sponge pre-filters, four HEPA filters, four side brushes and four mop pads – 17 parts in all. The forward-facing camera window is the maintenance item most owners overlook on this model. Floor-level airborne particles deposit a greasy film on the lens during every run, and a coated lens causes the robot to register false obstacles in open floor space, shorten its path or end the session early with a navigation error. Wipe the camera window weekly with a dry microfibre cloth. A single wipe restores the field of view completely when caught early; left for a month, the film bonds into a haze that takes repeated cleaning to clear and may already have caused the robot to miss entire zones across multiple sessions.

Tap the HEPA filter edges over a bin weekly and replace every two to three months – at 8,000 Pa in a home without pets, a three-month interval is realistic. Do not wash the pleated HEPA element with water; water disrupts the pleat geometry permanently. Inspect the main brush weekly, cut wrapped hair along the full roller length and clear both end-cap bearing holes with a toothpick. Replace the brush every six to eight months. Clear the side-brush posts weekly and replace the pair every three to six months. Remove the Aqua Force mop pad after every run, rinse under warm water, and hang it to air-dry completely before the next session. Replace the pad every two to three months. Empty the dust box after every run and rinse the shell weekly.

At a glance

• Matched to Your Device – Every part fits the RR79OF0 and all other Serie 95 models in this maintenance set without modification.
• Long-Lasting Components – HEPA filters sized for the 8,000 Pa motor and mop pads chosen to hold their cleaning face through daily Aqua Force wetting.