Yeedi M12 Pro+ – Plus.Parts® Replacement Dust Bags

The Yeedi M12 Pro+ is a Yeedi robot vacuum and mop system that pairs with a self-emptying station to automate the collection side of the cleaning routine. After each session, the station activates a suction channel that draws debris from the robot’s onboard bin and presses it into a sealed bag, leaving the robot ready for the next run without any manual bin action. The fill indicator signals when the bag has reached capacity, providing a straightforward prompt for a change.

These 4 replacement dust bags keep that cycle running between indicator alerts. Each bag is shaped to seat fully in the M12 Pro+ station’s sealing recess so the auto-seal fitting activates on insertion, creating an airtight channel between the suction port and the bag interior throughout every emptying pass. The bags are rated for the fill volume the M12 Pro+ station was designed to accept, keeping suction output consistent and the indicator timing accurate from the first use to the prompted change. Plus.Parts® stocks these bags to the original specification so the station’s fill counter and reminder stay on schedule after each swap.

The 4-pack is manufactured to a consistent seam and material standard, maintaining structural integrity under the dock’s compression cycles. The sealed closure engages on removal, keeping collected dust contained for a clean, straightforward bag change.

Overview

• Station-Matched Fit – Formed to the M12 Pro+ station’s sealing recess so the auto-seal channel activates and the bag registers correctly from the first emptying cycle.
• Consistent Capacity – Fill volume matches the M12 Pro+ station’s design specification so suction output and indicator timing stay accurate across all bags in the 4-pack.
• Pre-Listing Check – Our team verified these bags against the M12 Pro+ station before listing – get in touch if you have questions about fit or change timing.