Ecovacs T30 PRO Omni Station CH2311A – Plus.Parts® Replacement Dust Bags

The Ecovacs T30 PRO Omni Station CH2311A is the all-in-one docking unit that supports the Ecovacs Deebot T30 PRO Omni robot’s complete cleaning cycle. At the end of each session, the station activates an internal suction channel that draws debris from the robot’s bin and presses it into a sealed bag, keeping the bin clear without manual action. Alongside this, the station washes and air-dries the mop pads so the robot is fully prepared for its next run. A fill indicator gives a clear prompt when the collection bag needs changing.

These 4 replacement dust bags are the component that sustains the CH2311A station’s bin collection cycle between those prompts. Each bag is formed to the station’s sealing recess dimensions so the auto-seal fitting activates fully on insertion, creating a direct, airtight connection between the suction port and the bag interior from the first emptying pass. The bags are rated for the fill volume the CH2311A station was designed to hold, keeping suction output consistent and indicator timing accurate throughout the full cycle. Plus.Parts® stocks these bags to the original specification so the station’s counter and reminder behave correctly after each swap.

Each bag in the 4-pack is built to a consistent seam and material standard, delivering reliable containment under the dock’s compression cycles. The sealed closure engages on removal, keeping the collected load inside for a clean, mess-free change.

Key details

• Designed for CH2311A – Formed to the station’s internal sealing recess so the auto-seal activates fully and the bag registers correctly from the first use.
• Matched Capacity – Fill volume rated to the CH2311A station’s design specification so suction output and indicator timing stay on track throughout the full 4-pack.
• Checked Before Listing – Compatibility with the CH2311A station was verified by our team – contact us any time if you have fit or service questions.