Ecovacs T30 Omni Station CH2311 – Plus.Parts® Replacement Dust Bags

The Ecovacs T30 Omni Station CH2311 is the full-service base station paired with the Ecovacs Deebot T30 Omni robot vacuum, bringing together auto-emptying, mop washing and mop drying under one docking routine. After each cleaning session, the station draws debris from the robot’s onboard bin through a suction channel and presses it into a sealed bag, leaving the bin clear and the robot ready to run again. A fill indicator alerts when the bag has reached its rated capacity, which typically spans several days of regular use.

These 4 replacement dust bags are what the CH2311 station relies on to keep that collection cycle uninterrupted. Each bag is formed to seat fully in the station’s internal sealing recess so the auto-seal fitting activates completely on insertion, establishing an airtight channel between the suction port and the bag from the first emptying pass. The bags are rated for the fill volume the CH2311 station was designed to accept, keeping suction output consistent and the indicator timing accurate throughout the full fill cycle. Plus.Parts® supplies these bags to the original specification so the station’s fill counter and reminder stay on schedule with every swap.

The 4-pack is produced to a consistent seam and closure standard, maintaining containment and structural integrity under the compression the station applies during each emptying cycle. The sealed closure activates on removal for a clean, mess-free change.

In brief

• CH2311 Station Fit – Formed to the station’s sealing recess so the auto-seal channel activates fully and the bag registers correctly from the first emptying cycle.
• Reliable Capacity – Rated fill volume matches the CH2311 station’s design specification so suction and indicator timing stay consistent across the full 4-pack.
• Pre-Listed Verification – These bags were confirmed against the CH2311 station before listing – contact our team if you have questions about fit or change timing.