Dreame L30 Ultra maintenance set

The Dreame L30 Ultra sits a step above the L20 Ultra in the RAK28 generation at 7,300 Pa, with the same dual rotary MopExtend mop and a standard rubber main roller, but a dock that varies its wash temperature between 58 and 75°C rather than running a single fixed heat. It refines obstacle avoidance over the L20 and the only real maintenance consequence is that on carpet-heavy floor plans filter cadence edges toward the three-month end of the range. The washable HEPA filter is tapped every one to two weeks, rinsed under cold running water monthly and dried a minimum of 24 hours before refitting, then replaced every three to six months; a filter reinstalled damp restricts airflow and loads the motor.

This maintenance set keeps each of those intervals supplied with Plus.Parts® components built as a direct-fit alternative to the original Dreame RAK28 kit: one main brush, four side brushes, four mop pads, four filters and four dustbags, seventeen parts in all. The dual rotary MopExtend pads are replaced as a matched pair every one to three months, since the right-hand pad is driven outward along wall edges and wears ahead of the left; inspect both at two months and replace once the outer-edge fibre feels compressed or sits shorter than the centre. The rubber main roller is cleared of wound hair every one to two weeks, both end-cap bearing holes probed clean, and replaced every five to seven months.

The side brush is checked weekly for hair wound around its base post, where it loads the brush motor unseen, and replaced every three to six months once the bristles splay and lose contact with the skirting. The auto-empty dock transfers the robot’s bin into the dustbag after every cycle, so the bag is changed before an overfull bag starts leaving dust in the bin, and the 4.5 L clean tank with its variable hot wash means the dirty-water tank is rinsed weekly. Behind the set is a real team at VacuumReviews.eu, so if a faint streak after mopping or a quicker-than-expected filter greying turns out to be an overdue consumable, reach out and we will sort it quickly.

At a glance

• Matched to Your Device – Main brush, side brushes, MopExtend pads, washable filters and dock dustbags all sized for the L30 Ultra brush chamber, filter bay and dual-disc mop deck, so each part seats without guesswork.
• Long-Lasting Components – A washable HEPA filter built for 7,300 Pa airflow, hard-wearing MopExtend pads and a rubber roller chosen to hold performance across the robot’s full service schedule.
• Responsive Support – A real team stands behind every order, ready to help with model identification, delivery questions or anything else you need sorted.