Dyson SV30 – Plus.Parts® Replacement HEPA Filter Pack

The Dyson SV30 is a regional Slim variant in the V12 family, delivering the same 150 air watts as every model in the range but without the piezo particle sensor found in the Detect Slim sub-range. The practical consequence of this difference is visible in how the machine signals filter maintenance: the V12 Detect Slim variants display a dedicated filter wash alert on the LCD screen when restricted airflow is detected, giving the owner advance notice. The SV30 does not carry this sensor and will not display any alert. When the filter carries enough compacted dust to restrict airflow significantly, the machine’s thermal protection circuit begins pulsing the motor in short bursts to prevent damage, without prior warning. Establishing and following a consistent monthly wash routine is therefore more important for SV30 owners than for Detect Slim users, because there is no system prompt to rely on.

This set of three Plus.Parts® washable HEPA filters supports that routine directly. Each filter is matched to the SV30’s post-motor housing, and having three available means the 24-hour drying period after each wash does not interrupt the machine’s daily schedule. Wash one, run the SV30 with a second while the first dries, and keep the third ready so the rotation is never short.

The filter elements are built to hold their filtration performance across the full service cycle. Reach out with any compatibility question about your SV30 or your order, and we will answer you personally.

At a glance

• Straightforward Installation – Each filter fits the Dyson SV30’s twist-lock post-motor housing, installing and removing in the same way as the original component with no tools required.
• Consistent Performance – Maintaining a monthly rotation with three filters keeps airflow at the rated level, preventing motor pulsing before it starts on the SV30’s no-alert platform.
• Reliable Quality – Filter elements built to the service cycle specification, holding their structure and filtration density from the first wash through to the last in the set.