Dyson V11 Absolute Pro – Plus.Parts® Maintenance Set

The Dyson V11 Absolute Pro is the Pro-tier configuration of the V11 Absolute family, adding the Laser Slim Fluffy head to the High Torque cleaner head already included with the core V11 line. The 185 AW Hyperdymium motor and single washable filter – part – are shared across all V11 variants. All V11 models require cold running water for filter washing; warm water is not appropriate for this generation regardless of what the machine is used on. Wash monthly at minimum and allow the filter a full 24-hour upright air-dry in a ventilated area before refitting. The bin seal around the dustbin base should be checked monthly for deformation or cracking; a bypassing seal routes fine particles directly into the motor path. The High Torque brush bar end caps need weekly clearing, and the Laser Slim Fluffy laser lens requires a monthly wipe with a dry cloth to maintain beam brightness.

This kit is a Plus.Parts® alternative to the original Dyson part , supplying 2 washable HEPA filters, a dustbin lid, an upper bin seal ring with a Torx screwdriver, quick-release buttons (small and large) and a trigger lock. The filter pair supports a no-downtime service rotation – one filter dries for 24 hours while the other keeps the machine running. The dustbin lid replaces the wear point at the bin release latch; the upper bin seal ring with included Torx screwdriver addresses the seal before leakage develops. The trigger lock eliminates continuous trigger pressure during longer cleaning sessions. Wash both filters under cold running water only: fill the body and shake firmly until clear, then leave upright for the full drying window. Replace annually or when the medium stays discoloured after a thorough cold wash.