Dyson V11 Absolute Extra – Plus.Parts® Maintenance Set

The Dyson V11 Absolute Extra extends the core V11 Absolute platform with an additional accessory bundle, combining the High Torque cleaner head with the Laser Slim Fluffy head for both carpet and hard-floor performance. At 185 AW the Hyperdymium motor processes a high volume of air per session, and Dyson specifies monthly filter washing with cold running water for every V11 model. Warm water is not the correct temperature for V11 filters – cold water is specified for this generation. Both the pre-motor filter and the post-motor HEPA element must air-dry upright for a minimum of 24 hours before the machine is reassembled. The High Torque brush bar end caps require weekly clearing; the Laser Slim Fluffy head’s laser lens window should be wiped monthly with a dry microfibre cloth to preserve the green beam that highlights fine dust on hard floors.

This kit is a Plus.Parts® alternative to the original Dyson part , supplying 2 washable HEPA filters, a dustbin lid, an upper bin seal ring with a Torx screwdriver, quick-release buttons (small and large) and a trigger lock. With two filters available, one can stay fitted and dry while the other is washed and left to air out for its required 24 hours – keeping the machine in daily use through the service cycle. The dustbin lid addresses cracking at the bin release mechanism; the upper bin seal ring, supplied with a Torx screwdriver, replaces the bin seal before a bypass develops. The trigger lock provides hands-free running during extended sessions. Wash cold-water only: rub the filter exterior firmly, fill and shake the body until the rinse runs clear, then stand upright for a full 24-hour air-dry. Replace both filters after approximately 12 months of normal use.