Dyson V11 Absolute Extra Pro – Plus.Parts® Maintenance Set

The Dyson V11 Absolute Extra Pro sits at the top of the V11 Absolute naming tier, combining the High Torque cleaner head with the Laser Slim Fluffy head and the most complete accessory set in the V11 line. Its 185 AW Hyperdymium motor shares the single washable filter part – – used across every V11 variant. Cold running water is the specified washing temperature for all V11 models; warm water, while correct for the V15 generation that followed, is not appropriate here and should not be substituted. Wash monthly and allow a full 24-hour upright air-dry before reinserting the filter. The High Torque brush bar end caps should be inspected and cleared weekly; the Laser Slim Fluffy laser lens requires a monthly wipe with a dry microfibre cloth – no liquids on the lens window – to keep the green beam at full visibility for detecting fine dust on hard floors.

This kit is a Plus.Parts® alternative to the original Dyson part , supplying 2 washable HEPA filters, a dustbin lid, an upper bin seal ring with a Torx screwdriver, quick-release buttons (small and large) and a trigger lock. Two filters in rotation mean one can always be clean and dry in the machine while the other completes the 24-hour drying window after washing – removing the most practical barrier to keeping to the monthly service schedule. The dustbin lid and upper bin seal ring are the bin assembly items most likely to show wear or deformation under regular use; the trigger lock enables extended hands-free cleaning sessions. Wash filters cold-water only: fill the body, cover both ends, shake firmly until the water runs clear, then drain and leave upright for a full 24 hours. Replace annually, or sooner if cold washing can no longer restore the medium.