Narwal Flow – Plus.Parts® Replacement Dust Bags

€61,95

Narwal Flow spare parts

Eighteen dust bags for the Narwal Flow auto-empty dock, providing an extended supply for the top-of-range Freo platform. The Flow reaches 22,000 Pa of suction and uses the FlowWash rolling track mop, which is scraped clean during each cleaning pass and then hot-washed at 78 degrees Celsius in the dock. The dock auto-empties the robot’s bin into a sealed bag on each return; this eighteen-bag supply keeps that function running across an extended stocking period.

Plus.Parts® quality, matched to your machine.

Available on backorder

Add to Cart
Narwal Flow - Plus.Parts® Replacement Dust Bags
Narwal Flow - Plus.Parts® Replacement Dust Bags
€61,95

Combine and get 20% discount on both items!

Narwal Flow - Plus.Parts® Maintenance Set

Narwal Flow spare parts

Keep your Narwal Flow running at full strength with a maintenance set matched to its 22,000 Pa suction and FlowWash rolling track mop. It gathers everything the robot uses up in service: an anti-tangle main roller brush, six side brushes (three left, three right), four dust bin filters, four large antibacterial dust bags and two track mop rolls. Seventeen parts in all, enough to reset every replacement interval in one order.

Plus.Parts® quality, matched to your machine.

Want to learn more about your Narwal Flow? Check out our review and maintenance guide.

  • Free shipping from €59
  • Post-payment available
  • Order yours before 3:00PM for same day dispatch, if in stock
  • Returns possible within 14 days of receipt

 

Guaranteed Safe Checkout

Narwal Flow - Plus.Parts® Replacement Dust Bags
Narwal Flow – Plus.Parts® Replacement Dust Bags
€61,95

    The Narwal Flow sits at the top of the Narwal Freo series, combining 22,000 Pa of suction with the FlowWash rolling track mop system. The FlowWash mop uses a built-in scraper that peels soiled water from the rolling mop during each cleaning pass, generating continuous grey-water transfer rather than a single rinse at the dock. The dock then runs a 78-degree hot-water wash cycle followed by a 40-degree warm-air dry, the highest temperature combination in the Freo range. Beyond the mop system, the dock also auto-empties the robot’s dustbin into a sealed 2.5 L station bag on every return. At the Flow’s 22,000 Pa suction level the robot lifts debris that lower-powered robots partially bypass, which means the bin fills efficiently per run and the station bag turns over at a consistent rate. A supply of eighteen bags provides the stock to maintain the auto-empty function over an extended period.

    These replacement dust bags from Plus.Parts® are designed for the Narwal Flow station bay, matching the 2.5 L dock format of the Freo series auto-empty station. Each bag seats in the station housing and receives the debris transferred from the robot’s bin on docking. The material is rated to maintain its sealed closure under the pressure the dock applies at the close of each empty cycle, and the eighteen-bag set provides an extended supply before restocking is required.

    The bag construction uses a laminated material that holds its seal integrity even when the bag approaches full capacity, preventing the micro-tears that allow fine dust to escape into the dock’s internal channel. The team behind this set handles questions about compatibility, delivery, and your order personally.

    At a glance

    • Tested and Reviewed – Confirmed against the Narwal Flow station bay before listing, verifying that the 2.5 L bag format and seal geometry perform correctly through the dock’s auto-empty cycle.
    • Built to Last – Laminated bag walls rated to hold seal integrity across the 78-degree hot-wash dock environment, maintaining containment from the first empty cycle through the full eighteen-bag supply.
    • Responsive Support – A real team responds to compatibility and order queries directly, whether the question is about the Flow dock format or the broader Narwal Freo series.

    Additional information

    Weight 200 g
    Dimensions 400 × 200 × 300 mm
    Manufacturer

    Plus.Parts

    Manufacturer Part Number(s)

    CP-PJ-A00129-00-00

    Package Quantity

    18

    Suitable Device Brand

    Narwal

    Suitable Device Model

    Flow

    Reviews

    There are no reviews yet.

    Be the first to review “Narwal Flow – Plus.Parts® Replacement Dust Bags”

    Your email address will not be published. Required fields are marked *