Narwal Freo Z10 – Plus.Parts® Dust Bag Value Pack

The Narwal Freo Z10 raises suction to 18,000 Pa within the Freo series, pairing that high-suction platform with a dock that runs a two-stage hot-water mop wash: a main scrub cycle at 40 to 60 degrees Celsius followed by a 75-degree final rinse. That dock architecture keeps the Reuleaux triangular mop pads far cleaner between sessions than ambient-wash platforms, but it also generates a higher dirty-water load per cycle and makes the station more maintenance-intensive than earlier Freo generations. The auto-empty function adds the station bag to the consumable list: on every return to dock the station transfers the robot’s bin contents into a sealed 2.5 L bag. At 18,000 Pa, the Freo Z10 lifts and bins debris efficiently, which means the bag turns over at a consistent daily rate. Eighteen bags per value pack provides the stock to maintain the auto-empty function over an extended period.

This dust bag value pack from Plus.Parts® is designed for the Narwal Freo Z10 station bay, using the same 2.5 L dock format as the YJCC019 and YJCC025 hardware variants. Each bag seats in the station housing and receives the transferred debris on docking. The material holds its sealed closure through the pressure the dock applies at the close of each empty sequence, across the full capacity range the station is rated for.

The laminated bag construction resists the seal-edge failures that thinner alternatives develop under repeated station pressure cycles, preventing fine dust from escaping into the dock’s internal channel over the stocking period. The team behind this set responds personally to questions about compatibility, delivery, or your order.

At a glance

• Designed for Daily Use – Rated for the debris volume an 18,000 Pa daily-schedule robot generates, these bags maintain sealed containment across the full fill range of the Freo Z10 station.
• Matched to Your Device – Bags confirmed for the Narwal Freo Z10 and YJCC019 dock format, using the same 2.5 L station bay geometry across the full Z10 platform.
• Recommended by Our Team – Reviewed by the team against the Freo Z10 dock cycle and recommended with confidence for the two-stage hot-wash station used across the Z10 series.