Philips HomeRun 7000 Series Aqua XU7000/02 – Plus.Parts® Maintenance Set

68,95

Philips HomeRun 7000 Series Aqua XU7000/02 spare parts

Keep your Philips HomeRun 7000 Series Aqua XU7000/02 running at full strength with a maintenance set matched to its 5,000 Pa suction, 430-vibration-per-minute flat mop and Dual Wave auto-empty dock. This 18-piece set gathers the consumables the robot wears through: two main brushes, four side brushes, eight filters and four mop pads.

Plus.Parts® quality, matched to your machine.

Want to learn more about your Philips HomeRun 7000 Series Aqua XU7000/02? Check out our review and maintenance guide.

In stock

Add to Cart
Philips HomeRun 7000 Series Aqua XU7000/02 - Plus.Parts® Maintenance Set
Philips HomeRun 7000 Series Aqua XU7000/02 - Plus.Parts® Maintenance Set
68,95

Combine and get 20% discount on both items!

Philips HomeRun 7000 Series Aqua XU7000/02 - Plus.Parts® Replacement Dust Bags

Philips HomeRun 7000 Series Aqua XU7000/02 spare parts

Twenty replacement auto-empty bags for the Philips HomeRun 7000 Series Aqua XU7000/02. The Dual Wave station uses a simultaneous push-and-pull airflow to empty the robot's 260 ml bin into these bags after every run. Each bag is rated for up to thirty days of normal household use. The XU7000/02 shares an identical consumable set with all other HomeRun 7000 Aqua variants, so this pack also fits the XU7000/01, XU7100/01, and XU7100/02. Twenty bags per pack covers over sixteen months at monthly intervals.

Plus.Parts® quality, matched to your machine.

Only 13 items left in stock!
  • Free shipping from €59
  • Post-payment available
  • Order yours before 3:00PM for same day dispatch, if in stock
  • Returns possible within 14 days of receipt

 

Guaranteed Safe Checkout

Philips HomeRun 7000 Series Aqua XU7000/02 - Plus.Parts® Maintenance Set
Philips HomeRun 7000 Series Aqua XU7000/02 – Plus.Parts® Maintenance Set
68,95

    The Philips HomeRun 7000 Series Aqua XU7000/02 is the lighter-finish version of the first-generation HomeRun 7000 Aqua and is mechanically identical to the XU7000/01 in every maintenance respect: 5,000 Pa suction, a hybrid rubber-and-bristle main brush, a 430-vibration-per-minute vibrating flat mop with electric water tank, and a Dual Wave auto-empty dock. Like its sibling it relies on the rotating LiDAR turret with cliff and bumper sensors and carries no ToF strip, so the only sensor work is a monthly bumper wipe and a weekly clean of the six underside cliff sensors that stop false drop-detections at thresholds.

    This set supplies every consumable as a Plus.Parts® direct-fit alternative to the original Philips parts and XV1473/00: two main brushes, four side brushes, eight filters and four mop pads, eighteen in total. The hybrid brush combines bristle rows that lift carpet pile with rubber ribs that scoop hard-floor debris, and fine hair collects where the two meet, so a weekly pass with the bundled tool keeps it from compacting against the end-cap bearings; replace every six to twelve months. The washable filters are tapped monthly, rinsed cold without detergent and dried for a full day before refitting – a damp filter behind 5,000 Pa of airflow invites mould in the chamber – and replaced every three to six months regardless of how they look, because a washable medium still loses pleat spring and frame seal over time.

    The two microfibre pads are rinsed after every run and machine-washed up to 60°C with no softener, since softener permanently coats the fibre; replace every three to six months, sooner once a stiff or matted face stops spreading the tank’s water evenly. The right-side brush is checked weekly and replaced every six to twelve months, as a splayed brush leaves dust stripes along the skirting. The Dual Wave dock’s 3.0 L anti-allergy bag lasts about thirty days when the transfer seals stay clean, so wipe the dock port, the robot port and the four charging contacts monthly with a dry cloth.

    At a glance

    • Matched to Your Device – The hybrid main brush, washable filters, vibrating-mop pads and right-side brush fit the HomeRun 7000 Aqua XU7000/02 exactly, so fitting is tool-free and seats first time.
    • Long-Lasting Components – Filters sized for steady 5,000 Pa airflow and durable microfibre pads built to survive the 430-vibration mop’s high friction load.

    Additional information

    Weight 200 g
    Dimensions 400 × 200 × 300 mm
    Manufacturer

    Plus.Parts

    Manufacturer Part Number(s)

    XV1470/00, XV1473/00

    Package Quantity

    18

    Suitable Device Brand

    Philips

    Suitable Device Model

    HomeRun 7000 Series Aqua XU7000/02

    Reviews

    There are no reviews yet.

    Be the first to review “Philips HomeRun 7000 Series Aqua XU7000/02 – Plus.Parts® Maintenance Set”

    Your email address will not be published. Required fields are marked *