Philips HomeRun 7000 Series Aqua XU7100/02 – Plus.Parts® Maintenance Set

The Philips HomeRun 7000 Series Aqua XU7100/02 is the companion finish to the XU7100/01 and shares its full current-generation specification: 5,000 Pa suction, a hybrid rubber-and-bristle main brush, a 430-vibration-per-minute vibrating flat mop, a Dual Wave auto-empty dock, and the front 3D ToF sensor with eight bumper ToF windows for fine small-object detection. For maintenance the two XU7100 units are interchangeable, and every consumable here is identical to the parts used across the whole HomeRun 7000 Aqua line.

This set supplies them all as a Plus.Parts® direct-fit alternative to the original Philips parts and XV1473/00: two main brushes, four side brushes, eight filters and four mop pads, eighteen in total. The hybrid brush’s bristle rows lift pile while its rubber ribs clear hard floors, and hair preferentially winds at their junction, so a weekly pass with the bundled cleaning tool prevents compaction at the bearings; replace every six to twelve months. The washable filters are tapped over a bin monthly, rinsed in cold water with no detergent and air-dried a full 24 hours before refitting, then replaced every three to six months – a washable medium still loses pleat spring and develops bypass leakage with age, which is why the kit includes spares.

The two microfibre pads absorb the extra friction of the 430-vibration mop, so they are rinsed after each run, machine-washed up to 60°C without fabric softener and replaced every three to six months once stiff or matted. The right-side brush is checked weekly for wrapped fibre and replaced every six to twelve months. The Dual Wave dock’s 3.0 L anti-allergy bag lasts roughly thirty days with a clean transfer seal, so wipe the dock and robot ports and the charging contacts monthly, the LiDAR turret every two to four weeks, and the cliff sensors and front ToF strip weekly – the ToF strip especially, since a dusty window stalls the robot on open floor.

At a glance

• Direct-Fit Compatibility – Every part matches the HomeRun 7000 Aqua XU7100/02 brush bay, filter chamber and mop deck, so fitting is tool-free and works just like swapping the original XV1473/00 parts.
• Built to Last – Filters for sustained 5,000 Pa airflow and wear-resistant microfibre pads suited to the high-friction 430-vibration mop, chosen to last the full replacement cycle.