Roborock Qrevo Curv 2 ProX – Plus.Parts® Maintenance Set

The Roborock Qrevo Curv 2 ProX sits at the top of the second-generation 18,500 Pa Qrevo flagship tier, adding advanced navigation and AI obstacle recognition over the Qrevo Curv 2 Pro while sharing the same mechanical architecture: DuoDivide dual-roller anti-tangle main brush, FlexiArm extending mop for wall-edge pad coverage, FlexiArm side brush on an arc arm, and Dock 3.0 with 75°C mop washing and warm-air drying. The AdaptiLift chassis raises the body for threshold crossing. Consumables for this generation are not interchangeable with the first-generation 18,500 Pa set; confirm the model designation when ordering to avoid receiving the wrong set.

This kit is a Plus.Parts® alternative to the original Roborock part, supplying 2 anti-tangle brush sets, 4 side brushes, 6 filters, 4 dust bags and 4 mop pads – 20 parts. The HEPA filter at 18,500 Pa loads significantly faster than on the original Qrevo; tap it out weekly and replace on a two-month schedule under daily use rather than waiting for the grey visual cue alone, which appears only after efficiency has already dropped. At every brush service, remove both DuoDivide rollers and clear the central divider channel; this channel is the anti-tangle mechanism, and any fibre packed there defeats it for both rollers simultaneously. The FlexiArm side brush rail collects grit over time; a monthly wipe and a manual check that the arm moves freely prevents incomplete wall-edge sweeping. Wipe the Dock 3.0 spray nozzle monthly, or every two to three weeks in hard-water regions. Inspect mop pads at six weeks rather than eight because FlexiArm extension concentrates wear at the outer pad rim.

At a glance

• Matched to Your Device – Every part fits the Qrevo Curv 2 ProX directly, covering the DuoDivide brush housing, filter bay, dock bag slot and FlexiArm mop mount without modification.
• Complete Reset in One Order – 20 parts spanning every consumable the robot and Dock 3.0 work through: brush sets, side brushes, filters, dust bags and mop pads.
• Fit for 8.02.0388 – Direct replacement for the original Roborock part number 8.02.0388 / 8020388 for the second-generation 18,500 Pa flagship tier.
• VacuumReviews.eu Backed – Reviewed and stocked by a team specialising in Qrevo-series maintenance; contact us if any part does not seat correctly and we will help identify the cause.