Roborock Qrevo S – Plus.Parts® Maintenance Set

The Roborock Qrevo S delivers 7,000 Pa suction with a single DuoRoller rubber main brush, dual spinning liftable mops and the first-generation Multifunctional Dock that cold-washes the mop pads and warm-air dries them at 45°C. The cold-wash dock is the key difference between the Qrevo S and the Plus, Pro and MaxV models in this tier: limescale on the spray nozzle develops slowly with cold water, so a monthly wipe is sufficient, and the dock wash cycle uses less power per session. The trade-off is that cold water does not dissolve surface grease as effectively as the hot-wash Dock 2.0 on the higher models, so owners mopping kitchen floors may want to hand-rinse the pads periodically to clear built-up grease that the cold cycle leaves behind.

This set supplies Plus.Parts® direct-fit alternatives to the original Roborock part 8.02.0297: a DuoRoller main brush, four side brushes, four washable filters, four mop pads and four sealed dust bags, all sized to the Qrevo S’s own mounts and dock. At 7,000 Pa the HEPA filter loads at a moderate pace and lasts two to three months under daily residential use. Tap the filter frame over a waste bin every one to two weeks; never wash the HEPA medium under water, as wetting permanently collapses the fibre structure. The main brush collects wrapped hair along the full roll and at both end-cap bearing holes – clear every one to two weeks and replace every five to seven months. The spinning mop pads take their wear at the outer rim from the counter-rotation and should be inspected around eight weeks; on the Qrevo S without FlexiArm, the standard eight-week window applies rather than the shortened six-week cycle on the Pro and MaxV.

Replace side brushes every three to six months and dock dust bags every three to five weeks. Behind the set is a real team at VacuumReviews.eu: the Qrevo S shares its 8.02.0297 kit with the Qrevo Plus, Qrevo Pro, Qrevo MaxV, P10 Pro and every market code in this tier, so if you are unsure which name your robot carries, reach out and we will sort it.

At a glance

• Matched to Your Device – Every part fits the Qrevo S and all other 7,000 Pa Qrevo-tier models without modification.
• Long-Lasting Components – Filters rated for the 7,000 Pa motor and mop pads built to hold their nap under the dual spinning system.
• Responsive Support – A real team stands behind every order, ready to help with model identification, delivery questions or anything else you need sorted.