Roborock Qrevo MaxV – Plus.Parts® Maintenance Set

The Roborock Qrevo MaxV is the most feature-rich model in the 7,000 Pa Qrevo tier. It combines FlexiArm extending mop coverage for wall edges with a forward-facing AI obstacle camera that routes the robot around shoes, cables and pet bowls, and pairs with the Dock 2.0 that hot-washes the spinning mop pads after every session. Those extras shift two maintenance windows compared with the simpler models in the tier: the FlexiArm extends each mop pad outward on every revolution for edge coverage, which amplifies the rim wear that the dual spinning mechanism already concentrates at the outer edge, bringing the pad inspection window down to six weeks rather than eight. And the AI camera lens picks up dust and fingerprints easily – a weekly wipe with a dry microfibre cloth stops the camera misreading clear floor as obstacles and avoids unnecessary detours.

This set supplies Plus.Parts® direct-fit alternatives to the original Roborock part 8.02.0297: a DuoRoller main brush, four side brushes, four washable filters, four mop pads and four sealed dust bags, all sized to the Qrevo MaxV’s own mounts and dock. At 7,000 Pa the HEPA filter loads at a moderate pace – tap all four edges over a waste bin every one to two weeks and replace every two to three months. Never wash the filter under water. The DuoRoller main brush wants wrapped hair cut along the full roll and both end-cap bearings cleared every one to two weeks; replace it every five to seven months. The Dock 2.0’s hot-wash cycle handles pad hygiene well but deposits limescale on the spray nozzle faster than a cold-wash dock – wipe the nozzle monthly in hard-water areas. Replace side brushes every three to six months and dock dust bags every three to five weeks.

Behind the set is a real team at VacuumReviews.eu: the Qrevo MaxV shares its 8.02.0297 kit with the Qrevo S, Qrevo Plus, Qrevo Pro, P10 Pro and the market codes QRS02-00, QRS52-00, QRS51-01, QR1PES, QR0PEP, QX1PEC and R100053, so if you need to verify which model you own, reach out and we will confirm it.

At a glance

• Matched to Your Device – Every part fits the Qrevo MaxV and all other 7,000 Pa Qrevo-tier models without modification.
• FlexiArm-Ready Mop Pads – Built to hold their nap under the accelerated rim wear that FlexiArm extension produces, so edge coverage stays consistent across the six-week inspection interval.